Home > News > Standard Operating Procedure For Fiber Optic Laser Cutting Machine

NEWS

Standard Operating Procedure For Fiber Optic Laser Cutting Machine
2019-07-26


Fiber optic laser cutting machine is an important equipment for sheet metal processing, the proper use of fiber optic laser cutting machine is also an necessary prerequisite for improving its service life.


Therefore, after purchasing the fiber optic laser cutting machine, we must master the standard operating machine operation procedures and methods to reduce the failure rate and improve the service life.



Below we will introduce the operation process of the standard specification of fiber optic laser cutting machine:

1. Follow the rules of power on and off in strict accordance with the regulations, do not force to close or open.

2. Employees can only operate on the fiber optic laser cutting machine after they have been fully trained.

3. During the working process of the fiber optic laser cutting machine, the idle personnel cannot access the operation station and console, and the core operation must be completed by a professional person.



4. Adjust the optical path of the machine tool and adjust the cutting head under the follow-up method. Enforce an accurate control process to ensure safe man and machine.

5. Every time you turn on the machine, you need to return to the reference point, check and process the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure inside the bottle should be no less than 1Mpa.

6. Weekly inspection of external light road support gas, cold road cabinet, cooling river road, air compressor, cold dryer, discharge filter water.


The above is a brief introduction to the standard operating procedure of the fiber optic laser cutting machine.


If you have any other questions, please contact Perfect Laser in time.