Home > News > Selection And Judgment Of Fiber Laser Metal Cutting Machine Speed

NEWS

Selection And Judgment Of Fiber Laser Metal Cutting Machine Speed
2019-08-21


How to choose the speed of fiber laser metal cutting machine and how to judge the speed of fiber laser metal cutting machine? After all, the machine is a whole, and it’s all about the whole body. We can only use every aspect of the machine to make the most efficient use of the machine and let the machine run normally.


On the contrary, when the laser cutting speed is too fast, it will cause the following undesirable results: ①can not be cut, sparks sprayed; ②causing the cut surface to appear a diagonal stripe road, and the lower half produces a melt③caused the entire section to be thicker, but no cracks were produced.


When the laser cutting speed is too slow, it will cause the following undesirable results: ①caused over-melting condition, rough cutting surface②slits become wider and dissolve at the corners③affect cutting efficiency.



Therefore, in order to make the fiber laser metal cutting machine equipment better perform its cutting function, it is possible to cut the spark from the laser device to determine whether the feed rate is suitable. If the spark is tilted backwards, the feed rate is too fast; If the sparks are not diffuse and less, condensed together, indicating that the speed is too slow; If the spark spreads from top to bottom, the cutting speed is appropriate.


In fact, most organic and inorganic materials can use fiber laser metal cutting machines, and laser cutting technology has incomparable obvious advantages compared to other traditional cutting methods. Fiber laser metal cutting machine not only has the characteristics of narrow slit and small deformation of workpiece, moreover, laser cutting has the characteristics of high speed, high efficiency, low cost, safe operation and stable performance.


With the rise of the third generation of laser cutting machine - fiber laser metal cutting machine, which concentrated on the advantages and perfecting the shortage of fiber laser cutting machine. Once on stage, it swept the market, countless metal and stainless steel processing bosses are rushing to buy. In the future, it must be an era in which fiber laser metal cutting machines shine.